folded window toppers & wrist hanger.
Note: can be just a hot pad too! Just sew with insulation and no zipper. 1. Cut out on outer black lines for rectangle shape. 2. cut and sew on window toppers first. Measure to make sure you have enough of the stripe material for length of tab/handle too. 3. Follow instructions for normal small bags with lining and zipper making sure your tab is sewn into bag before seams are all sewn. I put one on top in my samples and one where front of camper bumper is. Your choice. ;-) NOTE: this requires a person with knowledge of putting in a zipper with a lining. Also must know how to do the box bottom corner for extra bag width in bottom. Not hard once you do a few. Watch videos on. here is my link (may have to copy and paste) https://youtu.be/g0hoKW9pmMM These tasks if you have not done them before. You can actually turn any of my Hot PAD campers into zipper bags if you like, using your own extra fabric for lining. Also: I have made this design to cut out on the rectangular shape for easier sewing for the bag or if you are advanced sewer use the rounded shape and put in the zipper, lining an all. I have tested it and it works. Photos are on instagram and coming to my blog links too. Super cute with the touch of orange against the denim blue! ***I also did not put cut lines for box corner on lining. I found it much easier to just box pleat the outer piece, as it gets complicated when turning lining inside out & getting zipper correct.